About the functions and operations of Retevis A1 5W GPS Analog Two Way Radio

About the functions and operations of Retevis A1 5W GPS Analog Two Way Radio

Retevis A1 is the only retevis analog radio with GPS. A1 not only has GPS function, but also has IP67 waterproof and dustproof, NOAA, FM function, aviation band function, and supports TYPE-C charging. These functions combined make A1 very suitable for cycling, fishing, camping, mountain off-road, convoy, or hunting.

In today's article, we will introduce some functions and operations of A1.

1. GPS function settings:

①. GPS ON/OFF: turn GPS on and off

② GPS Info: get the GPS location of the device: latitude and longitude coordinates, speed, altitude, number of satellites, time.

③. Time Zone: Select time zone

Operation steps:

①. Enter meun-GNSS-GPS ON/OFF - Select ON

When this pattern is displayed on the screen, it means that the machine has not received the GPS signal at this time and needs to stay outdoors for a few more minutes

When the GPS icon is displayed on the screen, you can view the location coordinate information.

②. After turning on GPS, short press the Exit button to quickly view the GPS information of this machine and other people's GPS information. As shown below

Effects:

①. Quickly view GPS information: After turning on GPS, short press the Exit button to quickly view the GPS information of this machine and other people's GPS information.

②. View other people's GPS information: Press the up and down keys to select the GPS information of the selective call group. The other party's GPS needs to be turned on at the same time.

③. Distance measurement: When transmitting, if the ID of the other radio station is successfully matched, the screen will display the coordinates and distance measurement information of the other radio station after a few seconds: longitude, latitude, distance, speed, direction, time.

2. Turn on NOAA

①. Click the meun button --- NOAA Weather-Weather forecast --- select on

②. Press and hold the Exit button for 2 seconds and the screen will display the weather forecast icon and weather forecast channel.

③. Press the meun button again to confirm the weather forecast channel selection. Press the meun button to confirm the channel selection, and press the Exit button to exit the weather forecast reception. After turning on the weather forecast, the weather channel will be displayed on the secondary channel, and the main channel will remain in the standby state to receive the intercom signal.

If the standby is on a certain weather channel, an alarm will sound after a weather alarm.

3. Call alias display operation steps

Operation steps:

①.menu--setting--Identity code--on

②.menu--setting--Radio Identity--Select the defined No. 1-No. 80 or Alias ​​(If Alias ​​is selected, the following operation is required to set the alias)

③.menu--program--Radio Alias--You can edit a 6-character alias (Alias ​​editing: # key switches between uppercase and lowercase letters, and numbers)

Achievement effect:

For example:

①. Transmitter turns on the identity code

②. Select Alias

③. Alias ​​edit bd

The transmission will be displayed on the secondary channel, such as TX: bd. The receiver will display RX: bd

Retevis A1 5W GPS Waterproof Dual Band Analog Walkie Talkie