Quickly learn about the Retevis P1
Quickly learn about the Retevis P1
Retevis P1 high power long range DMR radio with single frequency repeater capability. The talking distance is doubled compared to the same frequency intercom. AES256 is compatible with moto mode, ensuring reliable and secure communication in work environments. It also has a 260-hour recording function to help you not miss important information.
Let’s take a look at this product today.
Appearance
We can see that this walkie-talkie adopts a very classic design. There are microphones and speaker on the front, and an antenna, channel, and sound knob on the top. There are PTT button and two side buttons on the left side. On the right is the headphone jack. Overall very simpleit feels heavy but not too heavy it feels kind of the right way of heavy in to do.
Basic Operation
Power on / off
Turn the power switch knob clockwise to turn on radio power ,to turn it off ,turn the power switch knob counter-clockwise.
Note: If you cannot turn on the radio ,please checking the battery pack, make sure charging the battery and correctly install battery.
If you can not turn on the radio。please contact the dealer
Volume Control
Turn the Volume switch knob clockwise to the increase volume ,to decrease the volume, rotate the volume switch knob counter-clockwise, you can checking the volume level by pressing the programmed key of monitor.
Note:Please refer to program software to set the programming key1 or key2
Channel Selection
Turn the channel switch to desired channel number ( 256 channels )
Note: There are 16 Zones, 16 channels for each zone for this radio. 1-16 Zone are switchable by programming setting , Detals refer to Zone selection TX. Press PTT and face to micphone talking between your lip 3-4cm. Release PTT to receive information and adjust desired volume level to get good voice quality.
Function Instructions
Program the functions by the correct software and the right program cable ( from original factory)
