What questions do you want to know about RT95 25W Dual Band Mobile Radio?

What questions do you want to know about RT95 25W Dual Band Mobile Radio?

Retevis RT95 is a 25W multi-channel analog mobile radio. It has a 180° rotatable LCD screen. It can be used in a variety of vehicle models, such as RVs, SUVs, jeeps, family cars, trucks, tractors, etc. It can be used with all retevis vehicle antennas.

Q：If the RT95 has a white screen but is operable, but the screen is white, what is the problem? 

A：If both the transmission and reception are normal, it may be that the cable connecting the motherboard to the display board and the LCD cable are loose. If the cable is loose, you need to disassemble the machine and re-plug the cable. If not, the LCD may be broken, or the cable itself is broken, and it needs to be returned for repair or repaired at a repair station.

Q：It will become overheated and not transmit in standby mode

A：It will not get hot in standby mode, and it will generally get hot after transmitting for a period of time. If the standby mode is always hot, it is related to the transmission power and the RT95 motherboard.

Q：Why can't the P2 key switch between VFO mode and channel mode?

A：You can customize this button P2 to other functions. If it doesn't work, then this button may be broken.

Q:How many channels does QRT95 have?

A:200 channels

Q:Will there be call ID information on the QRT95 screen?

A:RT95 will display the ID and the name of the caller (if the name is edited)

Q:If QRT95 is connected to a cigarette lighter, what conditions are required?

A:The voltage is within 12-13.8v, and the 12V power will be reduced accordingly.

Q:Why can't QRT95 be turned on?

A:The voltage used by ART95 is 12-13.8v. If the voltage is too high, the fuse in the power cord will burn out. At this time, the car station cannot be powered on, and of course it cannot be turned on. If the fuse burns out, you can replace the fuse provided.

Q:How to set the transmission relay tone of RT95?

A:This function is used to wake up a relay station in dormant state. This relay station requires a certain strength of pilot to be awakened. Usually, once the relay station is awakened, it is not necessary to send the pilot again.

1. Enter the FUNC MENU function menu and select function option 14;

2. Press the [PUSH] key to enter the menu setting, and the corresponding menu change item character on the screen turns green;

3. Rotate the channel switch to select the desired setting; 1000: pilot frequency is 1000Hz 1450: pilot frequency is 1450Hz 1750: pilot frequency is 1750Hz 2100: pilot frequency is 2100Hz

4. Press the [PUSH] key or the [P3] key to confirm and exit the setting.

5. After setting the pilot frequency, select the relay frequency, and then press the PTT+ DOWN button. There are UP and DOWN buttons on the microphone 14 9.2. Some repeaters require the walkie-talkie to transmit relay tone. The walkie-talkie can only connect to the relay after the repeater allows it.

Q:Is QRT95 SSB (single side single band)?

A:RT95 is a car radio with only FM (frequency modulation), without SSB (single side single band). CB radio is generally AM/FM, SSB is for amateur use, and the aviation band is AM. Some car radios have AM reception. If you need SSB radio, you can consider HS1.

Q:Does QRT95 have a scrambling function?

A:The RT95 currently on sale does not have a scrambling function. If you need to add scrambling function, you need to customize it separately.

Q:What is the difference between American and European frequencies

A:he difference is not big, but the frequency range of American frequencies is a little different. American frequencies are 144-148MHz and European frequencies are 144-146MHz

Q:How to turn off the dual reception of QRT95?

A:1. Press FUNC+P4 to enter the function menu list and select function 10

2. Press the channel knob to confirm, and the menu value on the LCD screen turns green.

3. Rotate the channel knob to select the desired setting. On: Enable the dual reception function. Off: Disable the dual reception function. 4. Press the [PUSH] button or the [P3] key to store the setting and exit.

RT95 25W Analog Mobile Radio