R1 UHF Analog Repeater System with 2PCS RT86 UHF Radio Bundle
- Extend Range Solution, Including UHF Repeater and UHF Handhelds
- R1 Comes with 5 Preset Channels to Work with RT86
GETTING CLOSER! ONLY $50.00 AWAY FROM FREE SHIPPING!
Order Handling Time within 3 Working days(Pre-sale products excluded).
Bulk order Inquiry
Personalize your device
OverView
Retevis R1 UHF Analog Repeater System with 2PCS RT86 UHF Radio Bundle
Retevis R1 25W UHF repeater can work with RT86 long range handheld 2 way radios, greatly improving communications coverage and eliminating blind spots at minimal cost. This extended-range solution is ideal for factories, schools, industrial parks, and underground car parks.
Extend Communication Distance
Retevis R1 repeater enables RT86 UHF handheld radios to achieve better coverage, better penetration, and longer range. An external long antenna will also greatly extend the communication distance.
Five Preset Channels
The R1 UHF repeater has five preset channels to help you communicate with members who use RT86 UHF walkie talkies. In addition, the base station supports customizing the needed channel to use, increasing ease of use.
Standard 3U Design
The standard 3U design fits in the standard rack for easy installation. It's convenient to operate the radio repeater in various working environments, such as factories, schools and industrial parks.
Built-in Duplex
Built-in duplex allows users to transmit and receive signals at the same time, adding flexibility and convenience to help work run smoothly.
AC & DC Power Supplies
Support AC110-220V and DC13.8V. It is convenient to use repeaters indoors and outdoors; in addition, DC and mobile power supplies are good helpers in dealing with emergency and outdoor power problems.
Temperature Protection
Retevis R1 base station features automatic voltage and temperature protection, making it efficient to respond and take actions to protect normal use of the repeater.
Better Heat Dissipation
The integrated heat sink and backplane fan make sure that the base station is always at a stable temperature to support long-term use.
Various Applications
The R1 repeater can enhance RT86 UHF handhelds' transmitting and receiving signals, and improve work efficiency. Thus, it's a reliable long-distance communication solution for factories, schools, and industrial parks.
Design Details of the Bundle:
① Speaker Microphone Connector
② External Sound Speaker
③ AC Power Connector
④ DC Power Connector, Rated input voltage 13.8V
⑤ TX Programming Connector
⑥ RX Programming Connector
When there is only one antenna, connect the antenna to the ANT connector
If using 2 antennas, ⑦ link the TX antenna, ⑧ link the RX antenna
MA05 High Gain Glass Steel Omni-Directional Antenna
Dual-Band 2m/70cm Base/Repeater Antenna, High Gain 5.5/8.5dBi, Fiberglass Antenna, SL16K Connector
50-3 Pure Copper Low Loss Coaxial Extender Cable
Material: pure copper, Impedance: 50Ω, Cable diameter: 5mm / 0.2inch. Extendable and can boost the signal of repeater significantly. Super Gainer Low Loss Coaxial Cable.
RT86 UHF Two Way Radio with a Hidden Screen and Flashlight
2 PIN Programming Cable For Retevis RT86
FAQs
However, if you customize the GMRS version, it does not include a duplexer.
If you are using the VHF or UHF version (which has a duplexer), you only need one antenna for both transmission (TX) and reception (RX).
Using Two Antennas:
If you are using the GMRS version (which does not have a duplexer), you need two antennas—one for transmitting and one for receiving.
Antenna: For signal transmission and reception.
Coaxial Cable: To connect the antenna to the repeater for signal transmission.
Spec
|
Specifications of the R1 UHF Repeater |
|
|
Center Frequency |
TX：464.5000MHz；RX：454.5000MHz |
|
Channels |
5 Preset Channels; 100 Memory Channels in Total |
|
Power |
25W |
|
Voltage input |
AC 110-220V；DC 13.8V |
|
Dimension |
483*330*133mm |
|
Specifications of the RT86 UHF Repeater |
|
|
Frequency |
400-480MHz |
|
Channels |
16 Channels |
|
Screen |
1.4-inch Digital Tube Hidden Display |
|
Battery Capacity |
2600mAh; 7.4V |
|
Bandwidth |
Wideband: 25 kHz; Narrowband: 5 kHz |
|
Net Weight |
295g (with antenna and battery) |
|
Operating Voltage |
7.4V DC |
|
CTCSS/DCS |
CTCSS (50)/DCS (232) |
|
VOX Level |
1-9 Level |
|
Squelch Level |
0-0 Level |
Feature
Functions of R1 Repeater:
● 5 Preset Channels (UHF); Compatible with RT86
● 50 CTCSS and 1024 DCS Codes
● DTMF/2Tone/5Tone Coder
● 25k(Wide Band)/20k(Middle band)/12.5k(Narrow Band)
● Channel Step 2.5/5/6.25/10/12.5/20/25/30/50kHz
Features of R1 Repeater:
1. Indoor and outdoor use
2. Ease of installation
3. Integrated heat sink and backplane fan
4. Bright and clear LED indicator lights
5. Automatic voltage and temperature protection
6. Improved audio quality
7. Built-in support for third-party duplexers
Applicable Occasion:
Applicable to: Large hotels, office buildings, high-end residential buildings, sports venues, large conference centers, large hospitals, industrial parks, etc
Product Reviews
Recently Viewed Product
We found other products you might like!
_md.jpg "2 PIN Programming Cable For Retevis")