How to Set the CTCSS/DCS Scan and NOAA Weather Alarm for the EZTalk 2/62?

Retevis EZTalk 2/62 long range handheld two way radio is simple to use with the functional menu. Here is a guide about setting the CTCSS/DCS scan and NOAA weather alarm for the EZTalk 2/62.

Easy to Operate EZTalk 2/62

Designed for outdoor adventures, EZTalk 2/62 long range handheld two way radio features a camo pattern for hiding in the woods and IP67 water-resistant for more durability. Retevis EZTalk 2 is a GMRS handheld walkie talkie with 30 channels, while Retevis EZTalk 62 is a VHF/UHF dual-band two way radio with 16 channels. They are fully loaded with features to keep you and your group safe and support your communications needs while out on the big hunt. They are very simple to use, with a menu that includes up to 19 function settings. You don't need to program the radio through software, use the menu to set all settings.

Function Settings in the MENU
1. Select A/B Band	2. CTCSS/DCS	3. TX Power	4. Bandwidth
5. Squelch	6. VOX	7. VOX Delay	8. TOT
9. Roger	10. Power Save	11. Hunting Calls	12. SCAN
13. Weather Alarm	14. Radio Information	15. Side Key Function	16. Battery Reminder
17. Factory Reset	18. Back Light	19. Light Time

There are multiple buttons on the front of the radio, which can be used as convenient shortcut operations through long press/short press.

Retevis EZTalk2 Keypad Settings

Retevis EZTalk 2/62 Keypad Settings

How to Set the CTCSS/DCS Scan?

You may often encounter two walkie talkies with the same frequency, but are unable to communicate with each other. This is because their CTCSS/DCS codes are different. EZTalk 2/62 can easily help you solve this problem. EZTalk 2/62 has a convenient function that can seek and copy CTCSS/DCS codes of the other radio without using the software.

First, short press "MENU" to enter the menu options, select "12. SCAN", and then select "SCAN CTSS". At this time, the walkie talkie will start scanning/seeking from 67.0Hz until it scans and successfully copies the CTCSS/DCS codes of the other walkie talkie. Now the two radios have the same CTCSS/DCS codes, if they also have the frequency, then they can talk to each other.

Set EZTalk2 CTCSS/DCS Scan

Set EZTalk 2/62 CTCSS/DCS Scan

After the scan is completed, you can view the RX and RX CTCSS/DCS codes of the walkie-talkie through "2. CTCSS./DCS" in the menu.

Check EZTalk 2/62 CTCSS/DCS

How to Set the NOAA Weather Alarm?

Long press the "WISP" button to enter the weather mode, and the screen will display the weather channel. Then short press "MENU" to turn on the 1050HZ signaling tone to receive NOAA alarms. There are 12 NOAA weather alert channels that keep you informed of a variety of weather-related hazards and environmental events, such as tornadoes, hurricanes, flooding, winter storms, and heat waves.

Set EZTalk2 NOAA Weather Alarm