How to set up the HA1G scanning function?

"Scan List Alias"

Set the scan list name, up and down keys can move the cursor, return key to delete the named character, the corresponding letters of the keyboard as follows

II: "Scan Dwell Condition", you can set the carrier dwell or sub-tone dwell.

> Press [Up Key] or [Down Key] to select "Scan Dwell Condition", and press [MENU Key] to enter.

>Press [Up Key] or [Down Key] to switch between Carrier Dwell or Subtone Dwell.

>Press [MENU key] to confirm and return.

>Press [EXIT] to return without saving.

Carrier Carrier Scanning: After turning on channel scanning, as long as the carrier matches (frequency matching), reception is turned on regardless of whether the current channel carries a sub-tone or not.

CTC/DCS Subtone Scanning: If the channel has a sub-tone, it needs a sub-tone match when scanning to turn on reception.

"Scan Mode", can be set to Carrier Scan, Time Scan, Search Scan.

 >Press [Up Key] or [Down Key] to select "Scan Mode", press [MENU Key] to enter.

 >Press [Up Button] or [Down Button] to switch between Carrier Scan, Time Scan and Search Scan.

 >Press [MENU key] to confirm and return.

 >Press [EXIT key] to return without saving.

IV: "Transmit Mode Setting", in the scanning process under the trigger launch, the selected transmit mode setting, can be set to the current channel launch, Last Active channel launch, Designated channel launch.

Selected, Last Active channel, Designated Channel.

> Press [Up Key] or [Down Key] to select "Transmit Mode Setting", and press [MENU Key] to enter.

>Press [Up Key] or [Down Key] to toggle the selection of Current channel, Last Active channel, Designated channel.

>Press [MENU Key] to confirm and return.

 >Press [EXIT key] to return without saving.

V: "Designated Transmit Channel Selection", if the designated channel is selected in the transmit mode setting, it will transmit from the channel selected here.

>Press [Up Button] or [Down Button] to select "Designated Transmit Channel Selection", press [MENU Button] to enter.

>Press [Up Key] or [Down Key] to toggle the selection of the specified channel.

> Press [MENU Key] to check the selection.

>Press [EXIT] to return.

VI: "Priority Channel 1", you can select a priority scanning channel from all channels

 >Press [Up Button] or [Down Button] to select "Priority Channel 1", press [MENU Button] to enter.

 >Press [Up Button] or [Down Button] to toggle the selection of a prioritized channel.

 >Press [MENU Key] to check the box.

 >Press [EXIT button] to return.

VII: "Priority Channel 2", same as "Priority Channel 1".

8: "Channel List", the channel list here is the channel to be scanned when the scanning function is on. Up to 16 channels can be added.

Scanning list belongs to the channel settings; you can rotate the knob to move the cursor, and then press EXIT to delete the scanned channel.

IX: "Hold Time", after scanning to the stay channel, the signal of the channel disappears, stay in this channel time. Rotate the channel knob to adjust

>Press [MENU button] to enter the setting interface.

>Press [UP KEY] or [DOWN KEY] or rotate [CHANNEL KNOB] to select signaling list.

>Press [MENU Key] to confirm the selection and exit.

>Press [EXIT button] to return without saving.