R1 Customizable Frequency Repeater with Fiberglass Antenna and Coaxial Cable
- Support VHF or UHF Customized Frequency Points
- Comes with Fiberglass Antenna and Coaxial cable
- 25W Long Range Radio Repeater
NOTE:
- Support Frequency Customization: VHF (Offset: ≥5.7MHz) or UHF (Offset: ≥10MHz); you can contact us via email. [Doesn't support GMRS frequency customization]
- Please note the customized information when placing an order.
- After confirming your custom frequency, it will take 1 month to customize.
- After customization, the frequency is fixed and cannot be returned.
Order Handling Time within 3 Working days(Pre-sale products excluded).
Bulk order Inquiry
Personalize your device
OverView
- Support VHF Customized Frequency Points
- 100 Memory Channels
- 50 CTCSS 1024 DCS codes
- DTMF/2Tone/5Tone Coder
- 25k(Wide Band)/20k(Middle Band) 12.5k(Narrow Band)
- Channel step 2.5/5/6.25/10/12.5/15/20/25/30/50kHz
① Speaker Microphone Connector
② External Sound Speaker
③ AC Power Connector
④ DC Power Connector, Rated input voltage 13.8V
When there is only one antenna, connect the antenna to the ANT connector
If using 2 antennas, ⑦ link the TX antenna, ⑧ link the RX antenna
⑤ TX Programming Connector
⑥ RX Programming Connector
MA05 High Gain Glass Steel Omni-Directional Antenna
Dual-Band 2m/70cm Base/Repeater Antenna, High Gain 5.5/8.5dBi, Fiberglass Antenna, SL16K Connector
50-3 Pure Copper Low Loss Coaxial Extender Cable
Material: pure copper, Impedance: 50Ω, Cable diameter: 5mm / 0.2inch. Extendable and can boost the signal of repeater significantly. Super Gainer Low Loss Coaxial Cable.
FAQs
However, if you customize the GMRS version, it does not include a duplexer.
If you are using the VHF or UHF version (which has a duplexer), you only need one antenna for both transmission (TX) and reception (RX).
Using Two Antennas:
If you are using the GMRS version (which does not have a duplexer), you need two antennas—one for transmitting and one for receiving.
Antenna: For signal transmission and reception.
Coaxial Cable: To connect the antenna to the repeater for signal transmission.
Spec
|
Customizable Frequency |
Support Frequency Customization: VHF (Offset: ≥5.7MHz) or UHF (Offset: ≥10MHz); [Doesn't support GMRS frequency customization] |
|
Memory Channels |
100 |
|
Power |
25W |
|
Voltage input |
AC 110-220V；DC 13.8V |
|
Dimension |
483*330*133mm |
Feature
Functions:
●Support VHF/UHF Customized Frequency Points
● 50 CTCSS and 1024 DCS Codes
● DTMF/2Tone/5Tone Coder
● 25k(Wide Band)/20k(Middle Band)/12.5k(Narrow Band)
● Channel Step 2.5/5/6.25/10/12.5/20/25/30/50kHz
Features:
1. Indoor and outdoor use
2. Ease of installation
3. Integrated heat sink and backplane fan
4. Bright and clear LED indicator lights
5. Automatic voltage and temperature protection
6. Improved audio quality
7. Built in support for third-party duplexers
Applicable Occasion:
Applicable to: Large hotels, office buildings, high-end residential buildings, sports venues, large conference centers, large hospitals, industrial parks, etc
Product Reviews
Recently Viewed Product
We found other products you might like!
