Analog Repeater

NOTE:

• Please note the customized information when placing an order.
• After confirming your custom frequency, it will take 2 weeks to customize.
• After customization, the frequency is fixed and cannot be returned.

• Customized Frequency
• 25W High-Power
• IP66 Waterproof
• Connect to Raspberry Pi to extend the signal
• Customizable Range: [UHF: 400-470MHz or VHF: 136-174MHz; Offset ≥5MHz and ≤12MHz]; Frequencies Should be Programmed within ±200 kHz

NOTE:

• Please note the customized information when placing an order.
• After confirming your custom frequency, it will take 2 weeks to customize.
• After customization, the frequency is fixed and cannot be returned.

• 25W High-Power
• IP66 Waterproof
• Frequency Range: 462.550-462.725 MHz (TX)  467.550-467.725 MHz (RX)

1. 3M Coaxial Cable: Using a 3-meter coaxial cable, the repeater and antenna are installed in close proximity, minimizing feeder loss and maximizing transmission power. 
2. Extend the Distance: RT97S GMRS repeater helps to connect emergency calls outside the range of the walkie talkies; and is suitable for outdoor activities, such as large-scale farms, remote mountainous areas, towns communications; etc.
3. Simplified Installation with Duplexer: The built-in duplexer allows for signal transfer using just one antenna, simplifying the installation process. Keep in mind the potential power loss associated with the duplexer.
4. Compact and Portable Design: RT97S portable repeater is lightweight and easy to transport. This makes it quite convenient for users who need to set up and relocate their repeater frequently.
5. DB-9 Female Connector: The RT97S base station can be directly connected to a mic and is compatible with Raspberry Pi.

1. Support VHF or UHF Customized Frequency Points
2. Comes with an upgraded feeder cable, which can reduce 1-2W power loss.
3. Customizable Range: [UHF: 400-470MHz or VHF: 136-174MHz; Offset ≥5MHz and ≤12MHz]; Frequencies Should be Programmed within ±200 kHz

NOTE:

1. Please note the customized information when placing an order.
2. After confirming your custom frequency, it will take 2 weeks to customize.
3. After customization, the frequency is fixed and cannot be returned.

NOTE:

1. Please note the customized information when placing an order.
2. After confirming your custom frequency, it will take 2 weeks to customize.
3. After customization, the frequency is fixed and cannot be returned.
4. This product does not include a cable to connect to the Raspberry Pi. 

*A repeater consisting of two RA87 40W GMRS mobile radios
*467.5500~467.7250, 8 GMRS relay channels
*Built-in linear regulated power supply, stable and reliable

Support CHIRP programming

Fast Shipping from the USA, Save USD20 When Checkout

1. 467.5500~467.7250, 8 GMRS Repeater Channel
2. 40W High Power and Long Range
3. Handheld Microphone, also Base Station
4. Built-in linear regulated power supply, stable and reliable.
5. Support CHIRP programming
6. Note: Duplexer is not included, there are no restrictions on receiving and transmitting frequency points, and dual antennas are required.

1. DB-9 Female Connector: RT97S base station can be directly connected to a mic and is compatible with Raspberry Pi.
2. Compact and Portable Design: RT97S mini repeater can serve as a vehicle transceiver substitute and can be easily mounted on roofs or in mountainous areas to effectively relay signals.
3. Extend the Distance: RT97S GMRS repeater helps to connect emergency calls outside the range of the walkie talkies; and is suitable for outdoor activities, such as large-scale farms, remote mountainous areas, towns communications; etc.
4. User-Friendly Interface: Featuring 8 GMRS channels, a vibrant color LCD display, and intuitive buttons, you can quickly select different relay channels for seamless communication.
5. Energy Efficient Design: The RT97S two way radio repeater is perfect for solar-powered repeater installations, requiring low power and occupying minimal space.

1. Extend the Distance: RT97S GMRS repeater helps to connect emergency calls outside the range of the walkie talkies; and is suitable for outdoor activities, such as large-scale farms, remote mountainous areas, towns communications; etc.
2. Upgraded Feeder Cable: This set includes an upgraded feeder cable, which can reduce 1-2W power loss. The new cable's size is φ10.62mm, much larger than the previous φ4.88mm.
3. Simplified Installation with Duplexer: The built-in duplexer allows for signal transfer using just one antenna, simplifying the installation process. Keep in mind the potential power loss associated with the duplexer.
4. Compact and Portable Design: RT97S portable repeater is lightweight and easy to transport. This makes it quite convenient for users who need to set up and relocate their repeater frequently.
5. DB-9 Female Connector: The RT97S base station can be directly connected to a mic and is compatible with Raspberry Pi.

1. Customized: The duplexer has a very narrow operating frequency band, Now allowing to customize the Repeater according to your TX and RX frequency.
2. Built-in Sound Card: Exchange data with Raspberry Pi(not include) via DB9 connector
3. Easy installation: built-in duplexer, volume is only 10.2*8.3*2.8in, weight is only 3.7ibl
4. Multiple power supply methods: powered by DC12V~24V power (car power and solar battery), and AC220V power
5. Best system performance: RT97S is dustproof and waterproof, and can be directly installed near the antenna to minimize the loss of the feeder.

NOTE:

1. Please note the customized information when placing an order.
2. After confirming your custom frequency, it will take 2 weeks to customize.
3. After customization, the frequency is fixed and cannot be returned.
4. This product does not include a cable to connect to the Raspberry Pi. 

1. 8 GMRS Repeater Channels
2. Built-in sound card can be connected to Raspberry Pi
3. Antenna and extender cable can boost the repeater's signal

Directly shipped from US warehouse

• GMRS Frequencies: Support the 8 FCC assigned GMRS repeater channels as well
• Built-in Sound Card: Exchange data with Raspberry Pi(not include) via DB9 connector
• Easy installation: built-in duplexer, volume is only 10.2*8.3*2.8in, weight is only 3.7ibl
• Multiple power supply methods: powered by DC12V~24V power (car power and solar battery), and AC120V power
• Best system performance: RT97S is dustproof and waterproof, and can be directly installed near the antenna to minimize the loss of the feeder.

• Customized: The duplexer has a very narrow operating frequency band, Now allowing to customize the Repeater according to your TX and RX frequency.
• Built-in Sound Card: Exchange data with Raspberry Pi(not include) via DB9 connector
• Easy installation: built-in duplexer, volume is only 10.2*8.3*2.8in, weight is only 3.7ibl
• Multiple power supply methods: powered by DC12V~24V power (car power and solar battery), and AC220V power
• Best system performance: RT97S is dustproof and waterproof, and can be directly installed near the antenna to minimize the loss of the feeder.

NOTE:

1. Please note the customized information when placing an order.
2. After confirming your custom frequency, it will take 2 weeks to customize.
3. After customization, the frequency is fixed and cannot be returned.
4. This product does not include a cable to connect to the Raspberry Pi. 

1. Extend range to ensure reliable communication
2. Exceptional Clear Voice Quality
3. Compact and Portable
4. Durable and Sturdy Body
5. Can be powered by DC12V~24V power, car power and solar battery

In stock version:

1. VHF-10mHz-Stock: Offset 10mhz, Tx:162.6125mhz and RX:152.6125MHZ.
2. UHF-10mhz-Stock: Offset 10mhz, TX: 463.3125mhz and RX: 453.3125MHZ

1. 10W Analog Portable Repeater
2. Extend the distance of the handheld Radios
3. TX frequency and RX frequency can be customized
4. Can be powered by DC12V~24V power, car power and solar battery

NOTE:

1. Please note the customized information when placing an order.
2. After confirming your custom frequency, it will take 2 weeks to customize.
3. After customization, the frequency is fixed and cannot be returned.

• GMRS Repeater: Extends communication range for handheld GMRS radios, ensuring reliable communication
• Full-Duplex Transceiver: Supports simultaneous send and receive, ideal for long-duration communication.
• Multiple Power Options: Supports 12V~24V DC, car power, and solar battery.
• Rugged and Durable: Built into a cable TV amplifier box, and waterproof design, suitable for outdoor use.
• Compact and Portable: Small size (310×283×170mm), easy to carry, perfect for outdoor use.

Flash Sale Spring Sale 2025

Limited Price, Limited Time